AMF 5.2 is designed with enhanced applications in mind and equipped with all the necessary hardware and software to fulfill this demand.

system monitoring is required. AMF5.2 is designed with enhanced applications in mind and equipped with all the necessary hardware and software to fulfill this demand. The unit is equipped with LCD Graphic Display, where user interface is simple and efficient. The user can choose what to display and all the alarm events are described in words. User can select the active display language from the menu. All system parameters can be set very easily.

System hardware allows the user to interface with high demanding applications, where high number of peripheral control is required. The system software also carefully designed in order to allow dedicated functions to be characterized for a particular application. Simple logic functions can also be executed on the auxiliary inputs and outputs, hence reducing the number of peripheral components. The controller has built-in multiple communication ports for enhanced interface with external control systems. RS232/485 can be used for onsite system configuration as well as remote control and monitoring of the system while integrated CAN Bus can communicate with engine ECU module. The system can also be interfaced with ENKO external i/o expansion modules for applications where specific dedicated hardware control is needed.

Three analog variables can be measured and controlled and functions can be made to operate on these measured analog values. In the standby mode, the unit can also measure and control the engine body temperature. The load can be controlled both manual and automatic, where both MCB and GCB contactors can be controlled from the front panel. The system can be used for dual Gen-Set applications, where one can be selected to be master and allow to control the others as slave units. AMF5.1 allows remote programming, monitoring and GSM interface with any external control system.


  • PC Interface for monitoring and system programming, SCADA control.
  • Real-time clock and time stamped alarm logging.
  • Phase sequence detection and reverse power protection.
  • Measurement of KW, KVA, KVAr, KWh and Power Factor.
  • Magnetic Pick-up input for RPM measurement.
  • Independent control of MCB and GCB from front panel
  • Phase sequence and reverse power protection for the Generator.
  • Full digital calibration of all analog measuring inputs.
  • Graphical LCD display with white LED backlight.
  • Full digital calibration of all analog measuring inputs.
  • RS232/485 com port with ModBUS/RTU protocol and CanBUS/J1939 interface.
  • 3 phase TrueRMS voltage and current for Generator and 3 phase voltage for Mains.
  • Earth curent measurement.

Key Benefits

  • Automatic or Manual transfer of the Load between the Mains and the Generator
  • Easily receive information regarding the status of the Generator and view/edit parameters by sending and receiving SMS messages over a mobile phone
  • Option to configure paramters using the front panel or via ENKO Pro-Link SCADA software.
  • Three analog displays on the front panel allow easy monitoring and single instrument control.
  • Dedicated functions for specific applications like Telecom.
  • Program weekly work schedules to test or simply run the Generator.
  • Internal relay outputs eliminate the need for external relay use.
  • The time and date stamped alarm and event logs allow easier and faster troubleshooting and maintenance.
  • Dual Mutual Stand-by function allows uninterrupted power supply using 2 Gen-Sets.
  • Communication with the ECU can be established via CanBUS/J1939 port and many pre-loaded engine configurations can be selected